Bobcat 953 Skid Steer Parts
This collection helps operators and repair technicians find replacement seal kits and hydraulic hoses for the Bobcat 953 skid steer loader.
At HW Part Store, we sell replacement parts for the Bobcat 953 skid steer loader. We offer various components categorized by circuit or application.
Whether the job is a full cylinder rebuild or a single hose replacement, the parts lists are organized by seal kit and hydraulic hose collections to help narrow down the correct fit.
Skid Steer Loader Seal Kits for Lift and Tilt Cylinders
The Bobcat 953 seal kit collection includes three aftermarket options. The Whole Machine Kit, priced at $177.24, contains two loader lift cylinder seal kits and two loader bucket tilt cylinder seal kits. It also includes a free O-ring pick set for installation, covering all four cylinders in one order.
This consolidated kit suits teams completing a full rebuild without sourcing hydraulic parts separately.
For targeted repairs, individual kits are also available. The Loader Lift Cylinder Seal Kit is $45.31 and fits cylinder part numbers 6593477, 6586871, and 6595512, with a 1-3/4 inch rod diameter and a 3-inch bore.
The Loader Bucket Tilt Cylinder Seal Kit is $43.31 and fits cylinder number 6588974, with a 1-1/2 inch rod diameter and a 3-inch bore.
Hydraulic Hoses and Diagrams for the Bobcat 953
The hydraulic hose collection for the Bobcat 953 includes nine hose positions covering the loader bucket tilt circuit, loader lift circuit for right-hand and left-hand cylinders, loader valve circuit, and auxiliary circuits at the arm pivot.
Hoses use an abrasion-resistant cover and are pressure-rated at 4,000 or 5,000 psi depending on position. A Bobcat 953 hose should not be substituted without confirming the diagram, fitting ends, and serial number (SN) application.
A hydraulic circuit PDF is included to identify the correct hose, and each product page provides a detailed diagram showing where that hose sits in the Bobcat system. Save the PDF with the work order, mark the hose’s position before removal, and compare the callouts with the old hose.
For products #6, #8, and #9, pricing is not listed because custom sizing may be required; use the PDF measurements and call with the old hose dimensions. This diagram-assisted process helps ensure the replacement hose matches the correct circuit and connection points.
Why Choose HW Part Store for Aftermarket 953 Bobcat Parts
HW Part Store offers free U.S. shipping on seal kit and hose orders over $150, and a 30-day return policy applies if a kit does not fit the intended cylinder. Support staff is available five days a week to help confirm the correct Bobcat part for a specific cylinder configuration or hose position.
A cylinder seal failure or ruptured hydraulic hose can bring Bobcat 953 skid steer loader work to a halt, and waiting on parts extends the interruption.
Keeping exact-fitting skid steer loader parts like replacement seal kits and hoses on hand for the Bobcat 953 allows repairs to begin as soon as a problem is identified. This helps small contracting teams and owner-operators running multiple machines on active job sites.
If a repair order mentions a seat, seat bar, operator cab, main frame, or accessories, those non-hydraulic parts require separate fitment checks.